TMT Hot Stab Manifold

TMT Hot Stab Manifold

The TMT Hot Stab Manifold has been designed for pressure testing subsea equipment with a water-glycol mix. It can control two, dual port hot stabs independently. The manifold uses Directional Control Valves (DCV) to direct the fluid to the required hot stab port.

When the required pressure is achieved in the respective port, Pilot Operated Check (POC) valves hold the pressure, allowing the pressure test to be carried out.

A pre-set pressure can be set topside and selected subsea, via a pilot signal. This pressure can be between 150 and 4500psi (7 to 310bar).

The relief valve in this manifold is set at 5500psi (379bar).

The Hot Stab Manifold can be customised to suit the client. 

Features:

  • Easy to install and remove
  • Corrosin resistant materials
  • Extremely compact
  • Relief valve
  • Field proven
  • Can be used with water, oils or glycols

 

Specifications:

Dimensions 216L x80W x255Hmm
Weight in Air 8.0kg
Weight in Seawater 6.7kg
Maximum Working Pressure 8700psi (600bar)
Maximum Hydraulic Pressure 3000psi (207bar)
Depth Rating Unlimited

Specifications subject to change without notice. All rights reserved.

MORE INFORMATION ABOUT THIS TOOL