5.5" Hub Cleaning Tool

5.5" Hub Cleaning Tool

 
The TMT 5.5” Hub Cleaning Tool provides a means to remove any foreign matter present on a 5.5” Tubing Hub. To maximise the effectiveness of the metal to metal and elastomeric seals used on the 5.5” hub, seal surfaces need to be clean and free from any foreign matter. The tool lands out on to the 5.5” hub on the manifold using a plastic shaped hub corresponding to a 5.5” tubing head hub.
 
A hydraulic motor is used to rotate a cleaning head. The cleaning head has three separate pads with a coarse Scotch Brite material fitted to the surface. There are no steel surfaces in direct contact with the hub.
 

Features

  • Cost-effective
  • Low maintenance required
  • ROV deployed & powered
  • Field Proven

Specifications

Dimensions Ø230 x480Lmm
Weight in Air 29Kg
Weight in Seawater 22Kg
Max Operating Pressure 2000psi (138bar)
Max Flow Rate 80L/min
Input Hydraulic Fittings 2x JIC-6 & JIC-4

 

MORE INFORMATION ABOUT THIS TOOL