TMT 5.5" Hub Cleaning Tool
TMT 5.5" Hub Cleaning Tool

The TMT 5.5” Hub Cleaning Tool provides a means to remove any foreign matter present on a 5.5” Tubing Hub. To maximise the effectiveness of the metal to metal and elastomeric seals used on the 5.5” hub, seal surfaces need to be clean and free from any foreign matter. The tool lands out on to the 5.5” hub on the manifold using a plastic shaped hub corresponding to a 5.5” tubing head hub.
A hydraulic motor is used to rotate a cleaning head. The cleaning head has three separate pads with a coarse Scotch Brite material fitted to the surface. There are no steel surfaces in direct contact with the hub.
TMT can customise the tool to suit your requirements.
Features:
- Cost-effective
- Low maintenance required
- ROV deployed & powered
- Field Proven
Specifications:
Dimensions | Ø230 x480mm |
Weight in Air | 29kg |
Weight in Seawater | 22kg |
Max. Operating Pressure | 2000psi (138bar) |
Max. Flow Rate | 80L/min |
Input Hydraulic Fittings | 2x JIC-6 & JIC-4 |